Personalised prints
Made for one person, one desk or one occasion. Pick the text, the colours and the shape.
Name tags, desk signs, keyrings, labels, party pieces, gifts
Personalised 3D prints, made to fit.
Name tags, gifts, practical parts and prototypes, printed to order by Jacob Dennison. Send an idea, a sketch or a photo of what needs replacing and get a price before anything is printed.
Try a design
Preview a personalised print, then ask for a quote on it.
What I make
Small batches and one-offs, checked for fit and finish before they leave.
Practical parts
Fixes for the small things that break or never quite fit: a missing clip, a bracket, a spacer.
Cable clips, brackets, storage dividers, spacers, replacement parts
Prototypes
Check the size and fit of an idea in your hands before committing to final manufacture.
Concept models, fit-check parts, enclosures, jigs
Recent prints
A few things I have made. Tap a photo to see it larger. Where a print has more than one photo, use the arrows or swipe.
-
Custom helmet, medium, red
-
Custom helmet, small, pink
-
Custom helmet, small, web design
-
Custom helmet, medium, with fins
-
Cut-out name in red and white
-
Themed name signs
-
Custom charging station
-
Folding tablet stand
-
Watch charger stand
-
Air conditioning duct cover, large
-
Air conditioning duct cover, small
-
Air conditioning duct damper
-
Replacement air conditioner faceplate (SereneLife)
-
Replacement air conditioner faceplate (Silvercrest)
-
Emergency override surround
-
Replacement cat flap door
-
Forklift replacement handle
-
Hinge pin and barrel nut
-
Keyed adapter for an electric masher
-
Echo Dot wall mount
-
Bin bag roll wall mount
-
Baby gate spacer
Custom helmet sizing
Helmets are printed to your measurement rather than a one-size shell, so they sit on the head properly instead of being nearly right. Set your circumference below and ask for a quote at that size.
Shell
Eyes
Lens
22.5″
Adult medium
Model diameter about 7.16″, plus clearance for hair and lining.
The picture is illustrative and scales with your measurement. Measured in inches around the widest part of the head, just above the ears. Read the band, but treat it as a guide. The tape measure decides.
Measure around the widest part of the head, just above the ears and across the mid forehead, keeping the tape level all the way round. Snug, not tight. That number is the one that gets used.
If the tape sits over thick hair, add about 0.4″ so the shell still clears. For a child, measure them standing still and slacken the tape back to the same snugness rather than letting them hold their breath.
- Printed in sections and joined, so a bigger shell does not need a bigger printer.
- The model is scaled to your measurement before printing, not picked off a shelf.
- Lining and strap fixings can be added. Say so in your enquiry and I will quote for them.
- If you already own a helmet that fits well, send its internal width and I will work back from that.
| Size band | Circumference |
|---|---|
| Toddler | Up to 18.9″ |
| Child small | 19″ to 20.4″ |
| Child medium | 20.5″ to 21.4″ |
| Adult small | 21.5″ to 22.2″ |
| Adult medium | 22.3″ to 23″ |
| Adult large | 23.1″ to 24″ |
| Adult extra large | 24.1″ and over |
Which material?
The right choice depends on what the part will live with. Heat, water, sunlight and flexing all matter.
| Material | Good for | Watch out for |
|---|---|---|
| PLA | Gifts, signs, name tags and display pieces. Crisp detail and the widest colour choice. | Softens in high heat, such as a hot car or direct sun behind glass. |
| PETG | Workshop parts, brackets and anything that needs to be tougher or see damp and daylight. | Slightly less crisp fine detail than PLA. |
| TPU | Flexible parts such as grips, bumpers, feet and seals. | Too soft for rigid, load-bearing parts. |
Not sure? Tell me where the part will be used and I will recommend one.
How it works
From idea to finished print in four steps.
Send the idea
Size, colour, what it is for, plus any photos, sketches or files.
Get a quote
I check it can be printed, suggest a material and confirm price and timing.
I print it
Printed, checked and tidied up for collection or postage.
You receive it
Something made for the job, the space or the person.
Questions
What should I send?
Whatever you have: an STL file, a sketch, a photo of the part, or a short description with measurements. Photos with a ruler or coin next to the part help a lot.
Can you design something from scratch?
Yes. Send a sketch, a photo of the part or the measurements and I will model it. Any design time is included in the quote so there are no surprises.
How do I measure for a helmet?
Run a tape around the widest part of the head, just above the ears and across the mid forehead, then give me that circumference in inches. The sizing section above works the rest out, and a photo of the tape in place is a useful double check.
How much does it cost?
It depends on size, material, print time and any design work. I give you a price before I print anything.
Can I collect, or do you post?
Either. We agree which when I confirm the quote.
Can you match a specific colour?
Tell me the colour you want and I will say what is available.
Get a quote
Tell me what you would like made, roughly how big it needs to be and when you need it.
Prefer to email? Attach photos, sketches or STL files straight to your message.
- Email: hello@dennisondesigns.co.uk
- Instagram: @KingDennison